ADMISSIONS
OPEN 2020

Apply Now

Student Achievements

RESEARCH CREDENTIALS:

Most of the department faculty members are pursuing their Ph.D. program in various reputed universities and few of our faculty members are recognized research supervisors of various universities including Anna University Chennai. There are about 20 research scholars are working under the supervision of our department faculty members. The department faculty members have published more than 100 research articles in various reputed journals and conference proceedings. The current research areas of our research scholars are Lean Manufacturing, Metal Forming, Boron Carbide Alloys, Aluminium Alloys, Electrochemical Machining, Material Characterization, Composite Materials, Alternate Fuels, Bio-Energy, Robotics, Design of Experiments and Optimization.

International Journals Published

  1. Dr. R. KarthikeyanHead of the department has published his research article in Annexure I journal (JonWiley) with impact factor of 4.9.
  2. Dr. R. Karthikeyan Head of the department has published his research article in Annexure I journal (Science Direct) with impact factor 1.2. So far his publications had recived 68 citations, h-index – 5, i-index – 1.
  3. Dr. R. Karthikeyan also chairs as a Doctoral committee member for four Ph.D scholars.
  4. Dr. R. Karthikeyan has launched a Project proposal to DST to obtain grant for research activities.
  5. Dr. S. Vijay Ananth has published three research articles in international journals of high reputation (Annexure II).
  6. Mr. S.K. Narendranathan has published two research articles in international journals of high reputation (Annexure II).
  7. Mr. Rajan has published one research article in Science Direct Journal.
  8. Gnanavelbabu A, Jerald Jand NoorulHaq A, "Multi objective Scheduling of Jobs, AGVs and AS/RS in FMS using Non-Traditional Optimization Techniques", (2008), International Journal of Manufacturing Science and Production, Vol. 9, Nos. 1-2, pp 61-80.
  9. Gnanavelbabu A, Jerald J, NoorulHaq A and Asokan P, "Simultaneous Scheduling of jobs, AGVs and AS/RS in FMS using Artificial Immune System" (2009), International Journal of Advances in Production Engineering and Management, Vol.4, No. 3, pp 139-150.
  10. Gnanavelbabu A, Jerald J, Narendar K and NoorulHaq A, "Simultaneous Scheduling Machines and AGVs in FMS Environment" (2009), Journal of Modern Manufacturing Technology, Vol.1, No.1, pp.43-57.
  11. Gnanavelbabu A, Jerald J and NoorulHaq A, "Scheduling of machines and AGVs in FMS using Sheep Flock Heredity Algorithm", (2009), International Journal of Industrial Engineering Practices. Vol.1, No.2, pp.109-118.
  12. Gnanavelbabu A, Jerald J and NoorulHaq A, "Simultaneous scheduling of Machines and Automated Guided Vehicles in FMS using Differential Evolution",(2010),International Journal of Production Research. Vol.48, No.16, pp. 4683 – 4699.
  13. Gnanavelbabu A, Jerald J and NoorulHaq A, "Particle Swarm Optimization for scheduling of Machines and Automated Guided Vehicles in Flexible Manufacturing Systems", (2010), International Journal of Materials, Manufacturing and Optimization. Vol.1, No.1, pp.01-11.
  14. Gnanavelbabu A, Dhivya S, Jerald J and NoorulHaq A, "Scatter search for scheduling of Machines and Automated Guided Vehicles in Flexible Manufacturing Systems", (2010), International Journal of Production Technology and Management Research. Vol.1, No.1, pp.09-18.
  15. Gnanavelbabu A, Arunagiri P,Bhaskar GB and Muniraj R, "Theoretical Methodology for Reduction of Industrial MUDA using Lean Six Sigma", (2012), International Journal of Production Technology and Management Research, Vol. 3, No.2,pp 117-120.
  16. Gnanavelbabu A,Rambabu D, Bhaskar GB and Ratnakar, "Development of an Algorithm for Nesting with Common Cut Methodology Using Identity Coordinator Function", (2012), International Journal of Production Technology and Management Research. Vol. 3, No.1, pp 1-10.
  17. Gnanavelbabu A,Venkatesan N ,Bhaskar GB, Fredric J, Vigneshan S & Kalaiarasu R, "Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay Composite", (2012), International Journal of Mechanical Engineering and Materials Sciences, Vol. 5, No.1,pp 1-5.
  18. Gnanavelbabu A,Rambabu D, Lenin A, and Bhaskar G.B, "Gap analysis and optimization of process involved in product design and development by integrating enterprise resource planning & product lifecycle management",(2013),ELSEVIER, Procedia Engineering, Vol. 64,pp 983-992.
  19. Gnanavelbabu A and Arunagiri P, "Implementation of Lean Manufacturing System in Bogie Assembly in Railway Coach Factory", (2013), Applied Mechanics and Materials, Vol. 248, pp 511-515.
  20. Gnanavelbabu A,Thirumalvalavan S, and Senthil R, "Effect of Heat Treatment on Tensile Strength, Hardness and Microstructure of AZ61A Magnesium Alloy", (2013), International Journal of Metallurgical & Materials Science and Engineering, Vol. 3(4), pp 39-48.
  21. Gnanavelbabu A and Arunagiri P, "Review on Reduction of Delay in manufacturing process using Lean six sigma (LSS) systems", (2013), International Journal of Scientific and Research Publications, Vol. 3, No. 2, pp 1 - 4.
  22. Gnanavelbabu A and Panneerdhass R,"Fatigue and creep life prediction for composites using FEA", (2013), International Journal of Mechanical Engineering and Materials Sciences, Vol. 6, No.2, pp 171-180.
  23. Gnanavelbabu A,Muthazhagan C, Bhaskar GB and Rajkumar K, "Influence of Graphite Reinforcement on Mechanical Properties of Aluminum-Boron Carbide Composites", (2014), Advanced Materials Research, Vol.845, pp 398-402.
  24. Gnanavelbabu A,Dhandapani N and Sivasankar M, "Failure Analysis of Cementless Hip Joint Prosthesis", (2014),Advanced Materials Research, Vol. 845, pp403-407.
  25. Gnanavelbabu A,Mugendiran V and Ramadoss R, "Tensile Behavior of Al5052 Alloy Sheets Annealed at Different Temperatures", (2014), Advanced Materials Research, Vol. 845, pp431-435.
  26. Gnanavelbabu A, Muthazhagan C, Rajkumar K and Bhaskar G.B, "Corrosion behavior of Aluminium-Boron carbide-graphite composites", (2014), Applied Mechanics and Materials. (Accepted for Publication)
  27. Gnanavelbabu A, Martin Charles M, and Rajkumar K, "Evaluation of Mechanical Property of Friction Welded EN24 Steel Joints" (2014), Applied Mechanics and Materials. (Accepted for Publication)
  28. Gnanavelbabu A and Loganathan D, "Formability Analysis of AA6061 Aluminium Alloy at Room Temperature" (2014), Applied Mechanics and Materials. (Accepted for Publication)
  29. Gnanavelbabu A, Sankar M, Baskaran R and Rajkumar K, "Abrasive Assisted Electro Chemical Machining of Aluminum-Boron Carbide-Graphite Hybrid Composite" (2014), Applied Mechanics and Materials. (Accepted for Publication)
  30. Gnanavelbabu A, Panneerdhass R, Baskaran R and Rajkumar K, "Mechanical Properties of Chopped Randomly Oriented Epoxy - Luffa Fiber Reinforced Polymer Composite" (2014), Applied Mechanics and Materials. (Accepted for Publication)
  31. Gnanavel Babu A, Senthil R and Ramadoss R, "Characterization of AZ61A Magnesium Alloy at Elevated Temperature", (2014), Applied Mechanics and Materials. (Accepted for Publication)
  32. Gnanavelbabu A, Sankar M and R.Baskaran, "Optimization of Surface Roughness in Electro Chemical Machining" (2014), Applied Mechanics and Materials. (Accepted for Publication)
  33. Sudhagar K, Karikalan L. and Chandrasekaran M (2013), " Comparative Studies on vegetable oil usage in C.I Engines as an Alternative to Diesel Fuel, International Review of Mechanical Engineering, Vol. 7, N.4, pp 705 – 715.
  34. Sudhagar K, Balasubramanian M. and Rajarajeswari G. (2013), "A study on seamless information sharing between robots in identifying the optimal path: An agent based approach", 5th int. Nat. Conf on Advances in Communication, Networking & Computing.
  35. Sudhagar K, Noorul Haq A. and Selvaraj T. (2009), 'An Intelligent Genetic Fuzzy Approach to the Truck baker Upper Problem', International Journal of System Simulation, Vol. 2, No. 2. pp. 611-616.
  36. Sudhagar K., Noorul Haq A. and Selvaraj T. (2009), 'Neuro-Fuzzy Based Adaptive Navigation for Truck Like Mobile Robot', International Journal of Soft Computing, Vol. 2, No. 7, pp. 727-732.
  37. Sudhagar K., Noorul Haq A. and Selvaraj T.(2008), 'Navigation of Mobile Robot in an Automated Industry using ANFIS Technique', Journal of Industrial Engineering, Vol.1, No.7. pp. 19-25.
  38. Sudhagar K., Noorul Haq A. and Selvaraj T., (2008) 'Particle Swarm Optimization Tuned Fuzzy Control Approach to the Truck Backer Upper Problem', International Journal of System Simulation, Vol. 3, No. 1.
  39. Sudhagar K., Noorul Haq A. and Selvaraj T., 'Online Path Finder Algorithm for Mobile Robot Navigation in Unmapped Region', International Journal of System Signal Control and Engineering Application (Under review).
  40. Sudhagar K., Noorul Haq A. and Selvaraj T., 'Application of Adaptive Neuro Fuzzy Network to Control the Self Learning System', International Journal of System Simulation (Under review).
  41. Vijay Ananth, S., Kalaichelvan, K. and Rajadurai, A. (2012) "Effect of Thermo Cycling Process in Al6063/SiCp Composites", European Journal of Scientific Research, ISSN 1450-216X Vol. 88 No 3, pp.403-408.
  42. Vijay Ananth, S., Kalaichelvan, K. and Rajadurai, A. (2012) "Optimization of Superplastic Forming of Al6063/5%SiCp Composites Using Taguchi Experimental Design", International Review of Mechanical Engineering (I.RE.M.E.), ISSN 1970-8734, Vol. 6, No.6, pp. 1209-1213.
  43. Vijay Ananth, S., Kalaichelvan, K. and Kumerason, M. (2012) "Effect of Temperature in Superplastic Forming in Al6063/SiCp", Composites Advanced Materials Research, Vol. 538-541, pp. 1111-1114.
  44. Narendranathan S.K. and Sudhagar K (2013), "Impact of Biodiesel on the performance & Emission of CI Engine", International Journal of Mechanical & Mechatronics Engineering IJMME-IJENS Vol:14 No:01.
  45. Thiyagu M., Shahul Hamid Khan., Prabhakaran G.,(2005) 'A Particle Swarm Optimization Algorithm For Permutation Flowshop Scheduling with regular and Non-Regular measures', The International Journal of Applied Management and Technology
  46. A. Siddique Ahmed Ghias, B. Vijaya Ramnath , C. Elanchezhian, M. Jaivignesh, S. Rajesh, C. Parswajinan (2014), Evaluation of mechanical properties of aluminium alloy–alumina–boron carbide metal matrix composites, Materials & Design, Volume 58, Pages 332–338
  47. A. Siddique Ahamed Ghias, K. Suresh, A. Sivarangar, N. Ramanan, (2013), Design and optimization of engine valve by light, Volume 2, pp 167-169.
  48. K. Suresh and A. Siddique Ahamed Ghias, (2013)," Investigation into cold upset forging of sintered Aluminium square Preforms", International Journal of Mechanical and Manufacturing Technology , Volume 2, Issue 2 pp. 170-175.

Papers Published in Conference Proceedings

  1. Gnanavelbabu A, Prabhaharan P, Jerald J and NoorulHaq A, "Particle swarm optimization for scheduling of machines and AGVs in FMS", Proceedings ofInternational conference on Advances in Manufacturing Technology, IIT Madras, Feb-2008. pp.C86.
  2. Gnanavelbabu A,NoorulHaq A and Jerald J, " Multi objective scheduling of jobs, AGVs and AS/RS in FMS using Sheaf Flock Heridity Algorithm", Proceedings ofInternational conference on Advances in Manufacturing Technology, IIT Madras, Feb-2008. pp.C87.
  3. Gnanavelbabu A, Jerald J, Prabhaharan P and NoorulHaq A, "Scheduling Optimization of Machines and AGVs in Flexible Manufacturing Systems", Proceedings ofInternational conference on Digital Factory, Coimbatore Institute of Technology, Coimbatore, Aug-2008. pp. 546-553.
  4. Gnanavelbabu A, NoorulHaq A, Jerald J, Asokan P and Narendar K, "Simultaneous scheduling of machines and AGVs by using AIS", Proceedings ofThe 6th International Conference on manufacturing Research 08, Brunel University, West London, September-2008, pp. 749-757.
  5. Gnanavelbabu A,NoorulHaq A and Jerald J, "Artificial Immune system based scheduling for Machines and Material Handling Systems in FMS", Proceedings of2nd International and 23rd All India Manufacturing Technology, Design and Research Conference, IIT madras, Dec 2008; p.51-57.
  6. Gnanavelbabu A, Jerald J and NoorulHaq A, "Multi objective scheduling of Machines and Material Handling Systems in FMS Environment", Proceedings ofInternational Conference on Supply chain Management and Information Systems, National Institute of Technology, Tiruchirappalli, Dec 2008. pp. 696-703.
  7. Gnanavelbabu A, Dhivya S, and NoorulHaq A, "Scatter search for Multi Objective Scheduling Machines and AGVs in Flexible Manufacturing Systems", Proceedings ofInternational conference on Advances in Industrial Engineering Applications, Anna University, Chennai, Jan 2010; pp. N29.
  8. Gnanavelbabu A,Rambabu D, Bhaskar G.B and Ratnakar, "Development of an Algorithm for Nesting with Common Cut Methodology Using Identity Coordinate Function", Proceedings ofInternational Conference on Futuristic Trends in Mechanical Engineering, ICFTME 2012, Thiruvalluvar College of Engg and Tech, Vandavasi, January 28th -29th, 2012.
  9. Gnanavelbabu A, VenkatesanN, Muruganandam N and Bhaskar G.B, "A Critical review on Nano clay related polymer composite material", Proceedings ofInternational Conference on Futuristic Trends in Mechanical Engineering, ICFTME 2012, Thiruvalluvar College of Engg. and Tech, Vandavasi, January 28th -29th , 2012.
  10. Gnanavelbabu A,Rambabu D, Lenin A and Bhaskar G.B, "Design and Optimization of Material Selection through the Integration of Enterprise Planning and Product Lifecycle Management", (2013), Proceedings ofInternational Conference on Engineering Materials and Processes, Tagore Engineering College, pp 283-287.
  11. Gnanavelbabu A,Senthilnathan D, Bhaskar G. B and Gopinath KGS4, "Characterization of Glass Fibre – Coconut Coir– Human Hair Hybrid Composites", (2013), Proceedings ofInternational Conference on Engineering Materials and Processes, Tagore Engineering College, May-2013, pp 404-409.
  12. Gnanavelbabu A and Panneerdhass R, "Fatigue and Creep Life Prediction for Composite Material Using FEA", (2013), Proceedings ofInternational Conference on Engineering Materials and Processes, Tagore Engineering College, pp 427-436.
  13. Gnanavelbabu A,Arunagiri P and Bhaskar GB, "Redesign of Manufacturing Process flow for UPCR Pump housing in Automobile Industry to Improve Productivity through Lean Production Systems", Proceedings ofInternational Conference on Engineering Materials and Processes, Tagore Engineering College, May-2013, pp 464-468.
  14. Gnanavelbabu A,Venkatesan N, Bhaskar G.B, and Poyyathappan K, "Effect of Nanoclay (MMT) on Mechanical Properties of High Density Polyethylene Nanocomposites", Proceedings ofInternational Conference on Engineering Materials and Processes, Tagore Engineering College, May-2013, pp 568-571.
  15. Gnanavelbabu A, Sankar M, Manikandan SK and Tamilarasan V, "Multi Objective Optimization of Micro Electro Chemical Optimization Process", (2013),Proceedings ofInternational Conference on Green Technology in Engineering and Applied Sciences, Adhiparasakthi Engineering College, GTME 95.
  16. Gnanavelbabu A, Jerald J and Noorul Haq A, "Multi objective scheduling of jobs, AGVs and AS/RS in FMS using Artificial Immune System", Proceedings of National conference on Emerging trends in Engineering and Sciences, Bannari Amman Institute of Tech., Dec-2007, pp. 229-239.
  17. Gnanavelbabu A, Noorul Haq A, Munikumar J and Jerald J, "Scheduling of machines and AGVs in FMS using Sheep Flock Heredity Algorithm, Proceedings of National Conference on Recent Advances in Manufacturing Management, Annamali University, Feb 2008.
  18. Gnanavelbabu A, Venkatesan N, Fredric J, Vigneshan S, Kalaiarasu R and Bhaskar G B, "Mechanical Behavior of Various Volume Fractions of High Density Polyethylene Nanoclay Composite, Proceedings of National Conference on Research Trends In Mechanical Engineering, NCRTME'12 , Vel's University, Chennai. April 11, 2012.
  19. Gnanavelbabu A, Rambabu D, Senthil Rajan U, Vasanthan KP and Bhaskar G.B, "Modeling of Heavy Vehicle Break Drum through Static and Thermal Analysis using CAE", Proceedings of National Conference on Fascinating Advancements In Mechanical Engineering "FAME 2013", RMK College of Engineering and Technology, March-2013, pp 154-158.
  20. Gnanavelbabu A, Venkatesan N, Babu S, Jaheer Hussain S, Ashokraj, and Bhaskar G.B, "Important Mechanical Properties in High Density Polyethylene Nano Composite", Proceedings of National Conference on Fascinating Advancements In Mechanical Engineering "FAME 2013", RMK College of Engineering and Technology, March 2013, pp 185-188.
  21. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., 'System Architecture and Methodology to Develop Mobile Robots', National Conference Proceedings on Modeling and Analysis of Production System, MAPS-2005, National Institute of Technology, Trichirappalli, INDIA, January 2004, pp. 137-142.
  22. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., 'Task planning of autonomous mobile robots using fuzzy heuristic control knowledge', National Conference Proceedings on NAME-2004, Jawaharlal National College of Engineering, Shimoga, Karnataka, INDIA, February 2004, pp. 28-29.
  23. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., 'Genetic algorithm based safe path planning of autonomous robot in uncertain Environment', 21st AIMTDR Conference Proceedings, Vellore Institute of Technology, Vellore, INDIA, December 2004, pp. 929- 935.
  24. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., 'Navigation of mobile robot by evolutionary learning', International Conference Proceedings on Emerging Technology in Intelligent System and Control, EISCO-2005, Kumaraguru College of Technology, Coimbatore, INDIA, January 2005, Vol. 3, pp. 437-441.
  25. Sudhagar K., Noorul Haq A., Selvaraj T. and Kalaivani R., 'Path planning of autonomous robot by artificial intelligence', International Conference Proceedings on Emerging Adaptive System and Technology, EAST-2005, Noorul Islam College of Engineering, Kumaracoil, Kanyakumari District, INDIA, December 2005, pp. 39- 47.
  26. Narendranathan S.K., Sudhagar K , ' A study of biodiesel as an alternative fuel for compression ignition engine', IEEE International Conference Proceedings on ICAESM - 2012, March 2012
  27. Vijay Ananth. S, Dhanasekar, (2013) "Analysis of Superplastic forming in Al6063 alloy", International Conference on computational Intelligence and Advanced Manufacturing Research, Vel's University, Chennai.
  28. Vijay Ananth S, Sethuraman and Viswapryia V (2013), "Extrusion analysis of Al6063/SiC Composites", Industrial Pollution and Control Technology, Annamalai University, Chidambaram.
  29. Vijay Ananth S., Chandrasekhar P and K.Kalaichelvan,(2012) "Superplastic Forming in Al6063/SiCp Composites", ICMOC 2012, Noorul Islam University, Thakklai.
  30. Vijayananth S., Ravi S and Kalaichelvan K. (2008), Forming And Analysis In Metal Matrix Composites Al/SiC, IIT, Madras(Dec-2008)
  31. Vijayananth S., Ravi S. and Kalaichelvan K. (2008), "Development and Superplastic forming analysis of Al/SiC composite sheet", National conference on Advances in Robotics , Precision Engineering & Manufacturing Techniques(AIRPAM2008) Madras Institute of Technology, Anna University, pp. 38-43.
  32. Vijay Ananth. S, Sundaram. S., Anantharaman. N., and Ravikumar. K., Proceedings of the International, Conference on Mechanical Engineering 2003 (ICME2003) 26- 28 December 2003, Dhaka, Bangladesh.

<

Faculty Development Programs organized

S.No. Title of the FDP / Workshops Sponsorship Organized Date Details
(Speaker and Chief Guest Name)
1 Engineering Thermodynamics ICT, MHRD, New Delhi 11th Dec to 21st Dec, 2012 Prof. U.N. Gaitonde,
Prof. U. V. Bhandarkar,
Prof. Bhalchandra Puranik
2 Engineering Mechanics ICT, MHRD, New Delhi 26th Nov to 6th Dec, 2013 Prof. Mandar M. Inamdar,
Prof. Sauvik Banerjee
3 Fluid Mechanics ICT, MHRD, New Delhi 20th May to 30th May, 2014 Prof. Sankar Kumar Som,
Prof. Suman Chakraborty,
Prof. Sandipan Ghosh Moulic

Details of FDP / Workshop / Seminar Attended

S.No. Name of the Faculty FDP/ W/ S Name of the FDP/ Workshop/ Seminar Sponsorship
& Organized by
Attended Date
1 Dr.A.Gnanavelbabu F Automotive Electrical and Electronics MIT, Anna University, Chennai 600 025. 10th-16th June 2013
F Engineering Materials and Metallurgy MIT, Anna University, Chennai 5th-11th 
Dec 2012
W Computational Fluid Dynamics Vel's University, Chennai 22nd
Sep 2012
W Recent Trends in Manufacturing Processes Tagore Engineering College, Chennai 7th and 8th Aug 2012
W Alternate Fuels Vel's University, Chennai 25th
Feb 2012
F Applied Hydraulics and Pneumatics MIT, Anna University, Chennai 7th-13th
June 2012
W Weldability of Advanced Materials & Newer Joining Techniques AICTE & TEQIP, NIT Trichy 29th Jan - 3rd July 2009
W Advances in Materials Processing MHRD- AICTE, NIT Trichy 30th Jun - 9th Jul 2008
W X-Ray Diffraction Analysis (XRD) Intellectual Property Rights (IPR) AICTE TEQIP, NIT Trichy on 15th March 2008
W Applications of Information Technology Tools in Manufacturing NIT Trichy 11th & 12th March 2008
W Laser Processing of Materials AICTE – TEQIP, NIT Trichy 6th&7th March 2008
W Advanced Tools and Techniques for Research in Engineering problems AICTE – TEQIP, NIT Trichy 25th–29th
Feb 2008
W Metallurgy and Materials: Today and Tomorrow AICTE – QIP 11th-15th
Feb 2008
W Metal Forming and Powder Metallurgy TEQIP, NIT Trichy 28th-30th
Jan 2008
W Recent Trends in manufacturing and Materials TEQIP, NIT Trichy 6th&7th
Jan 2006
2 Dr.K.Sudhagar W Shocks & Vibration ISEAC,Bangalore 15th to 17th Mar 2012
W Transformation of Students into Industry suitable workforce: Enhancement of Employability and Beyond IIT, Chennai 25th to 26th Nov 2011
W Recent Advances in Mechanical Engineering' at Noorul Islam University, Kumaracoil Shiefield University, UK

8th & 9th
April  2010
W Autonomous Mobile Robots Karpagam College of Engineering 19th
 July 2008
W Intelligence Control in Robotics & Automation National Institute of Technology, Calicut 6th -8th
Dec 2008
F Hydraulics & and Pneumatic Controls Anna University 29th Nov to 8th Dec 2004
W Role of Women in Technical Education NPA Ploytechnique College, Koonur 14th
Aug 2003
W Staff Training Programme on Effective Communication KEY Consultancy 28th-29th
Oct 2003
W Internal Quality Audit Training Programme Braintrust Management Studies, 21th - 25th July 2001
W Training the Trainers' NICE 7th - 9th
Dec 2000
3 Dr.S.Vijay Ananth W Applications of Optimization in Research Saveetha Engineering College, Thandalam. 21,22 March 2013
W Metal Forming Process VIT, Chennai 1st Dec 2012
F Engineering Materials and Metallurgy MIT,Chennai 5th - 12th
Dec 2012
F Instructional Design and Delivery System NITTR in MNM Jain Engineering College 17th - 21st Aug 2010
F Engineering Mechanics MIT Dec 2010
4 Mr.S.K.Narendranathan W Engineering Mechanics ICT, MHRD, IIT Bombay 26th Nov to 6th Dec 2013
W Emerging Trends in Alternate Fuels & Automotive Electronics Karpaga Vinayaga College of Engg. & Tech., Chennai.

7th & 8th
Sep 2012
F Research Methodology ICT, MHRD, New Delhi June 2012
F Engineering Thermodynamics ICT, MHRD, Agni College of Technology 11th to 21st  Dec 2012
5. Mr.U.Omsakthivel F Engineering Mechanics ICT, MHRD, New Delhi 26th Nov to 6th Dec 2013
W Engineering Thermodynamics ICT, MHRD, New Delhi 20th Nov to 24th Nov 2012
W SERC School on Automotive Engine Combustion NCCRD, IIT M & IISC 24th -28th Sep 2012
W SERC School on Automotive Combustion Control Systems, Sensors, Actuators & Real Time Embedded Controllers NCCRD, IIT M & IISC 28th -30th
Jan 2013
W Fluid Mechanics ICT, MHRD, New Delhi 11th - 15th Mar 2014
6. Mr.M.Dhinakar W Engineering Mechanics ICT, MHRD, Agni College of Technology 26th Nov- 6th Dec 2013
F Engineering Thermodynamics ICT, MHRD, Agni College of Technology 11th - 12th Dec 2012
7. Mr.M.Paranthaman W Engineering Mechanics ICT, MHRD, New Delhi 26th Nov- 6th Dec 2013
W Engineering Thermodynamics ICT, MHRD, Agni College of Technology 11th -12th Dec 2012
8. Mr.S.Damodaran (STP) Recent trends in advanced welding technology AICTE-ISTE, Kings College of Engg., Thanjavur 16th -20th,June 2008
F Instructional Design and Delivery system National instate of technical teachers training and research, Chennai, Meenakshi University 6th -10th
 Sep 2010
9. Mr.A.R.Manikandan W Engineering Mechanics ICT, MHRD, Agni College of Technology 26th Nov -  6th Dec 2013
10. Mr.M.Thiyagu W Engineering Mechanics ICT, MHRD, Agni College of Technology 26th Nov-  6th Dec 2013
W Decision Making and Optimization Operational Research Society of India, Chennai. 7th Sep 2012
W Advanced Measurement Techniques for Metal cutting Research CRDM, Karunya University 5th Feb 2010
11. Mr.T.N.Suresh Kumar FDP Instructional Design &delivery ICT, MHRD, Agni College of Technology 26th Nov - 6th Dec 2013
12. Mr.M.Karthikeyan W Engineering Mechanics ICT, MHRD, New Delhi 26th Nov -  6th Dec 2013
W Mind without fear Anna University, Chennai 30th May 2012
W Mechatronics and Robotics Veltech University 4th - 8th July 2011
W Advanced Materials Veltech University 9th  - 10th  March 2011
W Conservation Techniques Vellammal Engg. College 22nd Nov 2010
W Emerging Materials and Applications Aarubadai Veedu Institute of Technology 2nd - 3rd Dec 2010
W Composite Materials in Research and Industrial Applications DRDO,CSIR,Sriram Engineering College 28th  - 29th April  2010
W Lean six Sigma MSME, Chennai 27th June 2010
F Teaching Methodology Veltech Multi Tech Engg. College 11th - 12th June 2010
F FEM in dynamic Analysis and applications in Heat transfer,Fluid Mechanics Vellammal  College of Engg. and Technology 28th - 29th March 2011
13. Mr.S.Babu W Engineering Mechanics ICT, MHRD, Agni College of Technology 26th Nov - 6th Dec  2013
W Aakash for Education ICT, MHRD,
Vels university
10th - 11th Nov 2012
W Engineering Thermodynamics ICT, MHRD,
Vels university
11th -  12th Dec 2012
14. Mr.B.G.Sivakumar W Engineering Mechanics ICT, MHRD, Agni 26th Nov -  6th Dec 2013
F Teaching Pedagogies Agni College of Technology 3rd Aug 2013
15. Mr.G.Manojkumar W Engineering Mechanics ICT, MHRD, New Delhi 26th Nov - 6th Dec 2013
F Teaching Pedagogies Agni College of Technology 3rd Aug 2013
16. Mr.B.Arulkumar W Engineering Mechanics ICT, MHRD, New Delhi 26th Nov - 6th Dec 2013
F Teaching Pedagogies Agni College of Technology 3rd Aug 2013
17. Mr.R.Ramesh W Engineering Mechanics ICT, MHRD, Agni College of Technology 26th Nov - 6th Dec 2013
F Advanced Concepts and Techniques in Engineering Design AICTE, GCE, Tirunelveli 27th May - 8th June 2013
18. K.Suresh   Workshop on high impact teaching skills WIPRO Mission 10X Programme Dec 2010
W Applications of Optimization in Research Saveetha Engineering College, Thandalam. 21,22 March 2013
F Teaching Trainers programme NITTR in MNM Jain Engineering College 17th - 21st Aug 2010
W International Workshop on Research Vels University 9th Aug 2012
W Advancements in materials,Manufacturing and management systems Sri Sairam Engg College 4th-16th Nov 2013
F Instructional Design and Delivery System NITTR in MNM Jain Engineering College 17th - 21st Aug 2010
19. A.Siddique Ahmed Ghias F Instructional Design and Delivery System NITTR in MNM Jain Engineering College 17th - 21st Aug 2010
W Advancements in materials, Manufacturing and management systems Sri Sairam Engg College 4th  -16th
Nov 2013
W INTERNATIONAL WORKSHOP ON RESEARCH Vels University 9th  Aug 2012

Value Added Courses Conducted

S.No Batch Date Branch
Year/Sem.
Title of the Course Name of the company conducted
1 2010-2014 July & Nov 2012 III/V MS Project CADD Center
2 2010-2014 Jan - April 2013 III/VI Aptitude Training FAGRANCE Academy
3 2011-2015 Jan - April 2013 II/IV Solid Works CADD Center
4 2011-2015 July & Nov 2012 III/V MS Project CADD Center
5 2010-2014 Jan- April 2012 III/VI Aptitude Training FAGRANCE Academy
6 2012-2016 Jan- April 2012 II/IV Solid Works CADD Center

Guest Lectures Arranged

S.No Date Guest / Speaker Topic
1 24th Sep 2012 Shri.V.Muralidharan, Vice Chairman, Indian Institute of Welding, Chennai Welding Technology & Manufacturing Trends
2 18th Sep 2013 Dr.R.Saravanan, Regional director - South 2 , ISHRAE HQ, New Delhi Green Buildings
3 August 2013 Dr. Santhanakrishnan,
Rtd. Professor, IIT Madras
Engineering Graphics
4 21st February 2014 Mr.Shankar Rajasekaran, Director – Impec Filters pvt ltd. & Zonal Chair (south), Ishrae Ethics for Engineers

 
View All

News &
Upcoming Event


View All

Upcoming Events